Skip to content

How to Refinish Kitchen Cabinets

Refinishing kitchen cabinets is quite expensive which is why a lot of people these days perform this task themselves. Like every other household item kitchen cabinets AZ can also get worn down after a few years which is why they need refinishing. Unfortunately not a lot of homeowners know how to refinish kitchen cabinets which is why they end up spending money unnecessarily. But if you truly care about the beauty of your home you will definitely be willing to learn the basics of home improvement. Here is how you can refinish the kitchen cabinets in your home and make them look as good as new.

Plan Your Work

Before you undertake the task of refurbishing your kitchen cabinets it is imperative that you make a plan. Firstly you need to get all the tools that will be used to perform the job. Some basic tools that will be required include masking tape, old newspapers, screw drivers, hammer, rags, sponges and paint brushes. When you have bought these items you can proceed further accordingly.

Begin Working

To start off you will need to completely empty the cabinets. Emptying the cabinets will make your job a lot easier as you will have no trouble moving around. Once you have emptied the cabinets it’s time to remove the hardware. Use the screw driver to remove the screws and hinges that are holding the kitchen cabinets in place. An electric drill will do the job a lot faster but if you don’t have one use a screw driver.


Now that you have taken out the cabinet doors it’s time to begin the cleaning process. Start by scrubbing the doors, you can use a degreasing cleaner to perform this task. Dirt and grime can be hard to remove so use a good brand of cleaner for best results. No grease should be left on the kitchen cabinets or else it will interfere with the process of refinishing. You can also cleanse the cabinets hardware such as bolts and screws to give your cabinets a new look.


Your next task will be to sand the cabinet doors with sandpaper. If you can get an electric sander your job will become a lot simpler otherwise you will have to do your job manually. It is advised that you use a 150 or 180 grit sand paper for a good finish. Now you must remove the sand dust from the cabinet doors, use a vacuum cleaner to do this job.

Completing the Job

In the last stage of refinishing your kitchen cabinets AZ you will have to apply the wood stain and varnish. Use a brush to apply the wood stain to the surface of the cabinets, let it dry and then wipe it with a rag. Now to apply the varnish you will have to wait another 24 hours. You should use two coats of varnish. These can either be sprayed onto the cabinet doors or applied with a brush.

For more valuable information and advice on kitchen cabinets you can find help from these online professionals.